Ask Experts Questions for FREE Help !
Ask
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Dec 30, 2009, 01:23 AM
    Snow blower won't throw snow impeller works auger works new belt pushes up the chute
    The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 30, 2009, 08:24 AM

    Hi,
    How about a brand and model?
    Peace,
    Clarke
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Dec 30, 2009, 11:41 AM

    Craftsman 24" 5 hp 536886440 two stage
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Dec 30, 2009, 02:55 PM

    Hi,
    Sounds like something is not coming up to speed. The manual covers adjustment, etc. at:
    http://www.managemyhome.com/mmh/lis_...M/L0010540.pdf
    Peace,
    Clarke
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #5

    Dec 30, 2009, 07:39 PM

    I ve read this I did put a new belt on what and ajusted clutch what else speeds up impeller
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #6

    Dec 31, 2009, 05:41 AM

    Hi,
    As a general rule engine speed which is often as high as 3850 RPM.
    Peace,
    Clarke
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #7

    Dec 31, 2009, 02:38 PM

    Seems to run real well but it was sitting not used for three years carb maybe ?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #8

    Jan 1, 2010, 10:30 AM

    Hi,
    Does the engine slow significantly when the auger is engaged? That would point to a carb problem.
    Peace,
    Clarke
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #9

    Jan 1, 2010, 11:51 AM

    No it runs great even when its trying to push the snow out the chute the auger and impeller never slow down we have watched them both while going into snow
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #10

    Jan 1, 2010, 02:21 PM

    Hi,
    Did you use the original equipment belts? One of them is a custom size.
    Peace,
    Clarke
    sbertalot's Avatar
    sbertalot Posts: 6, Reputation: 1
    New Member
    		  
    #11

    Jan 3, 2010, 10:42 AM

    No I bought one at a auto parts store I ll try that thank you
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #12

    Jan 3, 2010, 11:02 AM

    Hi,
    Part #'s are 581264MA(4L x 35.6) and 579932MA(3L x 33.13)
    Peace,
    Clarke
    PS Anytime you opt for a non-OEM replacement, it is wise to ask for a Kevlar belt.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow thrower doesn't throw snow [ 8 Answers ]

Hello, I'm new but I really enjoyed all the questions I have read so far. My spirit snow blower does not all the time throw snow. Sometimes it does throw snow and all of a sudden it stop to throw snow. There is no clog in the chute. Could any one help me please, the snow is now on the ground and...

Murray Snow Blower Belt Slips Off [ 10 Answers ]

We replaced the drive belt on a Murray 8hp 2 stage snow thrower but it slips off immediately, even when I just pull the starter and rotate the pulley. It's the right belt according to the owner's manual, but it seems perhaps I could get away with a 1" smaller length and still not load the...

Ultra by murray snow blower belt [ 1 Answers ]

Need the large belt for a G2914050 Ultra by Murray 10HP 29 inch.

Changing snow blower belt [ 4 Answers ]

Okay, thought I'd try here first.. have a two stage 20" think its an aries.. it's an old model but works.. the only problem is after replacing the two belts, one jumps off when I engage drive.. these are the smaller drive belts.. not sure if anyone has a quick tip before give up on it.

How to replace a snow thrower chute [ 1 Answers ]

I have a older J.D. 214 lawn tractor with a snow thrower. The cabe that turns the chute is broken.How do these two cabels go to the chute

View more questions Search