Not your question?
Ask your question
View similar questions
Check out some similar questions!
Compression fitting
[ 1 Answers ]
My stand up drain for my washer comes to a Y at the top actually it has a fitting at the top I think whoever put it in uses it as a vent.but if I want to install a compression fitting at the top so my drain hose from the washer fits tight in it so it doesn't blow out water will I still need that Y...
Compression and Cartridge
[ 1 Answers ]
I am not getting much water pressure at the kitchen sink. Do I need to replace the compression cartridge?
Old compression nut and compression sleeve
[ 27 Answers ]
We have a shut off valve with a slow leak, about a teaspoonful every 10 hours. I want to replace the valve but the copper pipe to which it's attached is too short not allowing me to cut off the old compression sleeve. It's to my understanding that I may use the old compression nut and...
No compression
[ 3 Answers ]
I have a 2.4L twin overhead cam, the engine does not start, I did a compression test and they were as follows, from battery 156, 0, 165, 175... and It seems that every time I crank the engine I have oil splashing or such at the back of my engine bay... Any help or tips would be great thanks.
Linear sorting algorithms
[ 2 Answers ]
What are the different kinds of linear sorting and it will be appreciated if there is an algorithm for each.if no algorithm,well,it is still OK.please.thanks. View more questions Search
|