Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
200 amp main breaker contact clearance Regarding a Generator
[ 9 Answers ]
I have wired a generator into my 200amp breaker box. The generator power enters the box via a 50 amp breaker. My local utility representative tells me that the 200 amp main breaker does not have enough clearance to safely isolate my generator from the power grid. He is telling me that there...
Installing 200 amp disconnect switch below meter - options
[ 7 Answers ]
I am about to have power connected to a house but have noticed the jacket on the service entrance cable is starting to fray. I was looking at the possibility of installing a disconnect switch below the meter and running new wire from the disconnect switch to the main panel. Can I install a...
Cable size
[ 1 Answers ]
what is maen 1x3x10 mm2 single phase?
Cable size
[ 1 Answers ]
I have a 6.3kw hob for my kitchen, what is the smallest size twin and earth cable I can use to supply power to it?
What size of cable suitable_ 40 Amps, 250'/ 200'?
[ 5 Answers ]
Hello- I would like some information on wire AWG and grounding requirements with regards to generators. I set up remotely located mineral exploration camps in BC Canada- I am not an electrician... but would like to have some general information, and have an interest in electrical. Our camps... View more questions Search
|