Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier Natural Gas Furnace main gas valve will not open every call for heat
[ 1 Answers ]
We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:
Tempstar Furnace Malfunction Blows cold No Heat Call
[ 23 Answers ]
Tempstar about 10 yrs old?? (was here when I moved in) (Model number: NUGS050AF01 Gas/Has pvc pipes extending to outside at side of house. Is a split system No heat call. If I turn thermostat to on and turn up thermostat, nothing will happen. If I turn the heat from auto to run, the...
A/C & Heat thermostat will not call for heat
[ 4 Answers ]
Problem with a/c & heat thermostat Someone in my house knocked the thermostat loose from the wires I bought a new one, the same type, connected it and it will not go on. It will not call for heat. Don't know what to do now. Can anyone suggest anything?
Old Jantrol 21-100 Loud Buzzing at Call for Heat
[ 6 Answers ]
30 yr old Jantrol 21 series Model 100, 90K BTU nat gas furnace. Constant pilot.single stage. NO a/c. A loud buzzing sound has developed. It starts upon a call for heat and stops shortly after the flames fire up. Lasts probably 2 minutes total. Every time there's a call for heat. Its pretty loud . ... View more questions Search
|