Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom tile setting
[ 2 Answers ]
Hi All, I am re-tileing a shower and a jacuzzi tub. Can anyone tell me if the tiles on the walls are set first or the deck and do I leave a gap at the bottom for grout or caulking?
Bathroom Tile
[ 1 Answers ]
Hello, I am going to start tiling a basement bathroom floor. My question is whether I need backer board if I am tiling on cement already? Any help would be greatly appreciated.
Bathroom tile
[ 1 Answers ]
Hi, I have removed the old shower tiles and the surface has the old thin set on the floor in spots. I also, took some of the mortar out with the old tiles. Do I need to resurface the floor with new mortar and fill in the low spots and smooth over before laying the new tiles? This is my first tiling...
My bathroom has 2 layers of tile/ can it take a 3rd?
[ 4 Answers ]
My bathroom has 2 layers of tile and the woman who owned it before me tried to remove the tile. ( she did about a 1 ft square before she gave up- that's how I know there is 2 layers) she was very proud of the carpet she GLUED to the floor with contractors glue!! YUCK!! I am going to rip the carpet...
Bathroom Wall Tile
[ 2 Answers ]
I am tiling my bathroom walls with a ceramic tile. I want to do a diamond pattern. When I cut the pieces on a 45 degree angle, the tile chips off when I get close to the opposite corner. I don't get a clean cut from end to end. What is the secret to getting a nice end to end cut? View more questions Search
|