Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connect plastic toilet flange to cast iron drain
[ 4 Answers ]
I am replacing a toilet on a concrete floor in my basement. I plan on tiling the floor so I want to tile first and then replace the toilet so it sits on top of the tile. I removed the old toilet and found a cast iron drain pipe, a mangled metal flange and some type of rubber stopper the previous...
How do I remove cast iron/possibly brass plug from cleanout drain in bathroom?
[ 9 Answers ]
My bathroom sink is plugged solid. I tried to use snake under sink but can't seem to get it in very far. There is an old corroded clean out sticking out of the wall behind the toilet so I removed the toilet to get at it but it doesn't budge. It has a square nut on the top of what looks to be a...
How do I seal pvc toilet flange to cast iron drain pipe
[ 1 Answers ]
Just bought a house with damaged toilet. Existing plumbing is pvc toilet flange inserted into cast iron drain line. The flange is loose and needs to be refastened to the floor, subfloor condition permitting . How do I seal the pvc toilet flange to cast iron drain pipe to ensure no sewer gas leak?
Slow Bathroom Sink Drain - but Tub and Toilet Drain Fine
[ 4 Answers ]
I am hoping that someone can offer a suggestion to solve my problem. We recently purchased a 60 year old home. The sink in one of our bathrooms drains completely fine until the water has run for about 5 minutes and then all of a sudden it starts to back up and then drains very slowly. I have...
Moving cast iron toilet drain
[ 1 Answers ]
Hello all. First off, I have been reading some posts on toilet moving and I must say I am really impressed by the members here. Many of you are very thorough and thoughtful in your posts. All right, so here's my problem. I would like to move a toilet over about a foot in my bathroom. I will be... View more questions Search
|