[rgar2019]

Which is a better system, Carrier Comfort 14, Puron, 3.5 ton, single stage, 16 SEER, air conditioning and heating system, condenser model 24ACB442A003 to new refrigerant lines using Carrier evaporator coil model CNPVP6024ATA, ON TOP OF A CARRIER iNFINITY VARIABLE SPEED GAS FURNACE MODEL 58CVA110-1-20 W/CARRIER MECHANICAL AIR CLEANER OR A CARRIER COMFORT 15, PURON, 3.5 TON, 16.25 SEER, HEAT PUMP, CONDENSER MODEL 25HCB542A003 TO NEW REFRIGERANT LINES USING A CARRIER PERFORMANCE VARIABLE SPEED AIR HANDLER MODEL FV4BNB006T WITH A 08 KW AUXILIARY HEAT STRIP?
ANY ADVICE WOULD BE GREATLY APPRECIATED!

[hvac1000]

There is NO best system until much work has been done with a calculator.

In order to calculate what is best for you many different items will have to be known and calculated. Just for example the cost of electric and gas. The amount of electric and gas used per year along with home size etc. Then all the calculations begin. I suggest you contact your contractor and have them run a energy audit to see exactly which system you will benefit the most from. You are not comparing apples to apples here since both systems are of different design and use different energy sources for heating.

Note: I am not trying to make this difficult for you but accuracy is everything to me when spending customers money and knowing exactly what is the best can only be figured when all the paperwork calculations are done.



Please see the link below for further help in your selection of a qualified contractor.

[rgar2019]

What about using the different models(Infinity/Performance/Comfort series mix matched)?

[hvac1000]

Same answer as above. You need to contact your dealer since they are going to be doing the work.