Ask Experts Questions for FREE Help !
Ask
    bre808's Avatar
    bre808 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2006, 09:34 AM
    Goodman Gas Furnace
    I have a Goodman Gas Furnace, the hot surface ignite will not come on nor the flame sensor. I have tried everything and I am fresh out of ideas. Could you please help me on this. Thanks
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 25, 2006, 01:33 PM
    Have you checked to see it is getting power, and has continuity? Does the forced draft blower come on?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #3

    Oct 25, 2006, 02:01 PM
    Draft inducer must start, then the pressure switch closes, then the hot surface igniter starts to glow, then gas valve opens. Which of these things don't occure?
    440wedge's Avatar
    440wedge Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 30, 2007, 11:50 AM
    Quote Originally Posted by bre808
    I have a Goodman Gas Furnace, the hot surface ignite will not come on nor the flame sensor. I have tried everything and I am fresh out of ideas. Could you please help me on this. Thanks
    I bought my house 6 1/2 years ago and have replaced my surface ignitor 4 times so far.
    It is made of carbon and gets brittle and falls apart. Part No. B14010-15s. They cost about $20.00 and I have asked my supplier about it and they said Goodman has a new igniter coming out but I have yet to see it. I hope it is made of steel of some sort so as not to become brittle.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman furnace gmp [ 7 Answers ]

Ok. I can turn the thermostat to 72 and it will stay on 64 with the fan blowing constant. Burners aren't firing. On the control board for the furnace, there is a trouble shooting light that blinks to tell you what is wrong. It blinks four times which indicates an "Open Limit Switch", and it tells...

Goodman gas valve [ 2 Answers ]

I have a goodman model gmp 125-4. Last night I had a limit switch open code, I fixed it, the fan limit switch. Tonight I get a code 5 "false flame sensed", "gas valve stuck". I hit the valve with a scredriver handle, because I was told it might losen up the gunk sticking the valve. When I hit...

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

Gas furnace [ 14 Answers ]

Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks.

View more questions Search