Ask Experts Questions for FREE Help !
Ask
    sherrybainbridg's Avatar
    sherrybainbridg Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 13, 2009, 07:40 PM
    My computer won't read my cd
    My computer recognizes the cd drive but will not read the cd. It was reading fine a few days ago and it just quit.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
     
    #2

    Aug 13, 2009, 08:38 PM

    Have you tried other discs?

    Have you restarted the Pc since happening?

    Any changes that either happened or that you perhaps made to your computer around the time that the problem started; particularly any Software or Hardware that you installed or setup.
    Andriean's Avatar
    Andriean Posts: 50, Reputation: 1
    Junior Member
     
    #3

    Aug 15, 2009, 11:55 AM
    If this is the original dvd drive that came with the PC, ensure that the I/O cable is properly connected to the drive and motherboard.

    Have you updated your dvd drivers recently?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Compaq computer works, but won't read that AC adapter is plugged in, battery runs out [ 2 Answers ]

Hi, My computer was recently repaired, and worked fine... then stopped... then worked again perfectly for a month... then stopped again. I have figured out, that essentially the computer works fine, the battery is fine, and the AC adapter, and where it plugs into is fine. However, for some...

My ethernet card is not being read by my computer [ 3 Answers ]

Hi, I have windows me. Very old. A year ago a friend install a enternet card on my computer but did not give me the software to go with it. I had to reinstall my computer because of so many problems. When I did that erased the driver I had for the ethernet card. Is it posisble to burn the...

How can I get my computer to read my dvd writer Samsung model sh-s202n [ 2 Answers ]

Can someone please help me I need to know how I can get my computer to regonize the dvd writer it is a Samsung write master... I have been trying to get the computer to regonize it for about 6 hrs. and I can't figure it out... is there someone out there please help me I am in need for help on this

My computer doesn't read my new burner [ 2 Answers ]

I just got a new burner and my computer won't read it. My computer only has two plugs. The power & the ide flat cable.. my computer keeps saying "disc boot faliure, insert computer disc". I put in the software that came with it but the it won't read it. Did do something wrong & should I take it...

Computer won't read [ 6 Answers ]

My Dell will not read any device attached to it unless the device is attached when the computer is turned on. If I put a CD in the drive it won't read it, if I start the computer with the CD in, then it reads it. This also goes for any other device plugged in.


View more questions Search