Ask Experts Questions for FREE Help !
Ask
    capelapidary's Avatar
    capelapidary Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2009, 09:44 AM
    Wirlpool washer drain hose replacement
    How do I remave the back of the washer to remove the drain hose?
    stuartn's Avatar
    stuartn Posts: 85, Reputation: 2
    Junior Member
    		  
    #2

    Jul 18, 2009, 05:25 AM

    If the hose is connected directly to the pump then tip it back and access from the bottom is easiest.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer drain hose replacement [ 1 Answers ]

How do I replace the drain hose on my Whirlpool top-load washer?

Drain hose on washer [ 2 Answers ]

The drain hose in my washing machine is backing up. I had to replace the pipe that the hose sits in. It is about 3 inches shorter than the old one. Not sure if this has anything to do with the back up. It starts to drain fine, and then water comes out the top of the pipe.

Must play with drain hose to get washer to drain and spin [ 1 Answers ]

Hi, I have a GE WCSE6270 Washer. After the washer fills and agitates, it starts to make a gurgling, clicking noise and will not finish the cycle (i.e. drain and spin). I noticed that the drain hose in the back was a little leaky, and in trying to play with it, it made the washer drain and spin...

Drain hose for washer [ 1 Answers ]

We just moved into a house with a septic system and a basement hook-up for the washing machine. There is a open pipe above the washer hookups which I assume is the drain for the washer? How do I change out the hose or do I add an extension or what? Or is this a job for a plumber? It's a...

View more questions Search