Ask Experts Questions for FREE Help !
Ask
    seanmorrissey's Avatar
    seanmorrissey Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 2, 2009, 07:45 AM
    How Do I Set the Hot and Cold Water Setting on My Shower Valve?
    I have installed a new handle on my shower at home. However, when I turn the handle to the left - the water is cold. When I turn the handle to the right - the water is hot. I have a Moen shower system. Can anyone help me so that the hot water is activated by turning to the left and the cold water is activated by turning to the right?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jun 2, 2009, 08:05 AM

    I am not clear on what you want to do but you can reverse the action in a Moen valve by rotating the cartridge 180 degree. Tell us more and maybe your model number.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #3

    Jun 2, 2009, 09:11 AM

    As Ballangerb advised, it is very easy fix with Moen faucets. Their design allow to correct this w/o even turning water off. Do as follows:

    1. Put handle in middle position
    2. Unscrew middle screw
    3. Remove handle
    4. Notice position of the stem
    5. Take pliers and turn it 180 degrees
    6. Reinstall handle, screw

    That should do...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Symmons Temptrol Shower Valve - Cold Water Only [ 2 Answers ]

I have several 10 year old Symmons Temptrol Model A shower units. One has recently stopped all hot water. A second is warm at best. I was told by a friend (not plumber) that I need to replace the mixer valve or the part that stopps scolding. The reason being is the part wears out and defaults to...

Replace cold water valve stem in shower [ 1 Answers ]

How hard is it to replace my cold water valve stem in my shower

Shower Valve Hot and Cold is backwards [ 2 Answers ]

I have an American Standard Shower with a single rotating valve that reads Hot and Cold and the valve is backwards. When I turn it to the hot, cold water come out and so on.

Mixing valve tub/shower with no cold water [ 1 Answers ]

I'm flummoxed with a Delta, mid-1990's mixing valve. The valve has shut-off's via screw and locknut on cold and hot inlets, and I have good pressure there at both hot and cold side. But an inch-or-so away, at the main body holding the cartridge (I don't know the terminology, sorry), no cold...

Hot cold valve on shower [ 1 Answers ]

When I take a shower I can't change the temp on the shower. It doesn't grab something inside to make it hot or cold.


View more questions Search