Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wago connectors
[ 4 Answers ]
Any thoughts out there on these push on type connectors?
Sharbite connectors
[ 2 Answers ]
Hello I have to redo my plumbing . I spoke to a plumber he told me to run 1" supply and return for my hydronic and 1" to my radiant manifold.my question is since I would rather not solder because I'm not so good at it I used the sharkbite connectors for other things they work wonderful, but the...
PS/2 connectors
[ 1 Answers ]
Hi Again! Matt here, I've just installed a new motherboard in my computer everything works great except that I can't use my keyboard or my mouse unless I use the USB ports. I would rather use the PS/2s but can't figure out why they won't work. I tried looking for and adding drivers to no avail....
Romex connectors
[ 1 Answers ]
Going into the main breaker panel, can you put 2 romex wires through one romex connector (3/8") Also if allowed, can you run (1) 6/3 and (1) 8/3 romex wire through a 1" romex connector? Thanks all.
Crimp connectors
[ 1 Answers ]
What’s the proper way to install crimp connectors? Not butt splice connectors, I have used those many times. These connectors (made by GardnerBender) are plain metal and look like short pieces of tube. The instructions are confusing: insert wires, twist together then crimp. Are both wires... View more questions Search
|