Ask Experts Questions for FREE Help !
Ask
    mcw's Avatar
    mcw Posts: 16, Reputation: 1
    New Member
     
    #1

    Sep 16, 2006, 05:35 PM
    Circuit Breaker Won't Switch To On
    Hello, I'd appreciate anyone's advice. Today, I realized that one of my condensing units isn't working properly. So I was turning the breakers to both the A/C downstair and upstair units on and off periodically during the day to figure out the problem. Nothing has been solved on that end, but that's not the point of my concern.

    So, the circuit breaker to my downstairs unit will not turn back to "on" no matter how many times I go from extreme "off" to "on". Is this a problem beyond my expertise or is it possible to reset everything? Any help? Thank you.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Sep 16, 2006, 06:15 PM
    Well depends on how the breaker is acting. Is it just the handle won't click to reset , or is the breaker actually tripping from a short or overload.

    If the switch handle "feels" mushy or just won't "snap" or click when thrown to OFF, then it is a defective breaker.

    If your feeling the click and it is tripping off quickly, then sounds like a dead short.
    mcw's Avatar
    mcw Posts: 16, Reputation: 1
    New Member
     
    #3

    Sep 16, 2006, 09:09 PM
    Thank you for your reply. What do you mean by "dead short"? I really can't tell what it's doing. I take the switch from the off position and switch it to the on and it just falls back onto the off position. I do hear a slight "click" when going over to the "on" position. Sounds like a dead short. Thank you.
    Accent Lighting's Avatar
    Accent Lighting Posts: 11, Reputation: 1
    New Member
     
    #4

    Sep 18, 2006, 10:15 AM
    Your problem could need a certified A/C specialist. The condenser may be bad and has gotten to the point where it will flip the breaker to stop the unit from getting too hot and burning up.

    Another reason is that the breaker is old and weak. This does happen frequently to older homes or when A/C units have been recently replaced.

    It sounds to me like the condenser.
    mcw's Avatar
    mcw Posts: 16, Reputation: 1
    New Member
     
    #5

    Sep 18, 2006, 12:26 PM
    Thank you for the reply. I'm having someone come to look at the A/C system with attention to the condenser. But the odd thing was that the next day I woke and went out to check the circuit breaker, and it clicked into the "on" position. So now it leaves me wondering exactly why it wouldn't turn on in the first place. Any ideas? Could the short fix itself?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maximum load on 20 amp circuit breaker [ 14 Answers ]

I am aware of certain normal maximums. I guess I'm looking for somebody to tell me that I'm pushing things too far, or not. I want to hook up a portable air conditioner (Sunpentown WA-1220E) which is rated at 950 watts (and, mysteriously, at 9.0 amps) along with an HP 4Si printer, which is rated...

Circuit breaker installation [ 5 Answers ]

Hello, I'm attempting to do something that I've never tried before, Install a breaker switch. I'm using 12 Gauge wire and a 20 amp breaker switch. I definitely need some guidance in this. Is there anybody out there who can help me?

Circuit breaker [ 3 Answers ]

A circuit breaker connected to the kitchen tripped twice. I had an electrician in but the problem persists - in fact, the very day the electrician came. It does not seem to be caused by any one particular appliance. The first time I was using the waste disposal and the next two times nothing was...

Circuit breaker popping [ 4 Answers ]

We just got a new refrigerator and the circuit braker for the air conditioning keeps popping. We live in Central FL by Daytona and it is really hot right now but we can't keep the air running. Help!!

Circuit Breaker Troubleshooting [ 4 Answers ]

I purchased an old farm with a water well. It was checked last summer with the pump company's pump (I assume they used their pump because there was no power at the property then) and it pumped well (15 gpm). Now I have electricity and tried to power up the pump. The fuses are the old...


View more questions Search