Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
"HOT" Neutral wire in outlet box? Cause?
[ 4 Answers ]
Using outlet box with power and 3 neutrals(tied together/insulated) I want to use for adding a light fixture. Separated wires and found voltage on one of the neutral wires (measured ground wire to N). Any condition where power on the neutral lead is OK?
2000 mtd 42" cut rider will not go into neutral
[ 5 Answers ]
when I went and picked this mower up (it had been sitting in a guy's backyard for 2-2 1/2 years), it went into neutral fine. We were able to push it onto the trailer with no problem. But, when I got to my house, and went to back the mower off the trailer, I could not get the thing to go into...
Open ground when neutral not touching ground
[ 3 Answers ]
Hi, I was moving around a room and noticed my wife wanted her desk elsewhere. I decided to, since she would have her computer on it, check the outlet she would be moving to. It seemed old so I changed it. I noticed before I changed it that with my GFCI tester, all sockets on this circuit were...
Ground and neutral bar
[ 2 Answers ]
I'm installing a 4 wire, 50 AMP GFCI for my hot tub. My question is at my main breaker for the house where I'm taking power from, which bar is neutral and which bar is ground, or does it matter? Thanks Fred View more questions Search
|