Ask Experts Questions for FREE Help !
Ask
    lmedina5's Avatar
    lmedina5 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 31, 2006, 01:47 PM
    Kenmore Elite Gas Dryer
    Kenmore Elite Gas Dryer Runs But No Heat and Won't Dry Model No.110.70932990
    dsmfan's Avatar
    dsmfan Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 26, 2009, 12:33 PM
    I'm having the same problem. Is there a pilot light on this thing?
    mattson's Avatar
    mattson Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 16, 2009, 02:39 PM
    Kenmore elite No. 110.76922501 - power flashed in house - dryer won't come on. Washer and dryer on same breaker - washer works - is there a reset button on these dryers?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Dryer won't heat [ 16 Answers ]

I have a heavy duty Kenmore Elite dryer for about 5 years (bought new) but it doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. We clean lint out each time. Just doesn't heat on any of the dial settings. I've switched power at the...

Kenmore elite Dryer - [ 3 Answers ]

My kenmore dryer starts the drying cycle then after about 2 - 5 minutes shuts off. It will restart after about 30 minutes. I have checked the thermal cut offs hi limit thermostats, etc. Any suggestions?

Kenmore Elite Dryer won't dry thoroughly [ 2 Answers ]

I have a Kenmore Elite Dryer, approx 2 years old, its gets hot, tumbles and stops but the clothes are not completely dry (more dry setting). I have change the dryer hose, and I have also cleaned what I could inside of the lint bin (very hard to get into). As a result, I pulled out A lot of lint...

Kenmore Elite HE3 Dryer Not Heating [ 1 Answers ]

I have a Kenmore Elite Dryer (electric) that is not heating. I pulled the toe panel so I could clean it out to see if that was the problem. After I cleaned it out I ran a short cycle and still no heat. I also noticed the heating coil did not change. Should these get hot, turn red during a drying...

Kenmore Elite Dryer [ 3 Answers ]

From time to time, I am able to select my drying selections, load size and all the settings but when I push START it only "clicks" and will not start. Then the next day, it is like it "resets" itself and works fine. There seems to be no reason when or why this occurs. Is there any reason why...

View more questions Search