Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO Heat in One Zone of Multiple Zone System
[ 6 Answers ]
The heat in our four zone house is working except for one zone. Digital Honeywell THermostat lights up when programmed, little flame picture appears and click noise is heard, just like other thermostats, but no heat in that zone. Any ideas what is wrong or how to fix. Thanks
Are zone valves or zone thermostats possible with a steam boiler?
[ 1 Answers ]
I have an old 4 story building with one thermostat controlling the steam heat to all floors. There is a commercial space on the ground floor and they are complaining that they don't get enough heat sometimes (and on occasion get too much!) They have suggested that there is some way to place a...
Zone heating. One zone won't turn furnace on.
[ 3 Answers ]
Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...
2 zone oil heat, 2nd zone runs 1st zone
[ 1 Answers ]
Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...
06 KIA Spectra
[ 5 Answers ]
We just bought a KIA. 23K miles check engine light just came on car running very good, temp of vehicle in the middle or lower, running smooth. Any ideas? I've checked all fluids. Thanks View more questions Search
|