Ask Experts Questions for FREE Help !
Ask
    mmoor69's Avatar
    mmoor69 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 4, 2009, 03:24 PM
    Filter Placement
    Where is the best place to put a fliter before or after the softener?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 4, 2009, 04:56 PM
    Before the softener. Cheers, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Evcon Electric Heat/Air unit filter placement [ 7 Answers ]

We live in a rented mobile home in Texas; the landlord requires us to change filters once a month in the heat/air unit, which is a Coleman Evcon. (There is no model number visible.) The filters were sitting tilted along the side, inside the case, when we moved in. We have lived here over a year and...

Pump won't lite after cleaning filter and inner filter [ 1 Answers ]

Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...

Placement of Whole-house Filter [ 4 Answers ]

I am planning to install a new pressure tank and water softener in my 25 year old home with copper pipes. We are on a private septic system and submersible pump well with fairly hard water. I have always been reluctant to install a water softener but removing the rust stains and scale from our...


View more questions Search