Not your question?
Ask your question
View similar questions
Check out some similar questions!
110 volt versus 220 volt mini heat pump
[ 6 Answers ]
I have enclosed my screened porch to create more living space(Florida Room). I am using a single zone mini split ductless heat pump for heating and cooling. It has been calculated that I need a 12,000 BTU unit. However, most of these units are available in 110 volts and 220 volts. The 220 models...
Question on 220 volt
[ 4 Answers ]
How can one identify 220 volt appliance besides looking on the appliance? Does 220 volt devices have the same 3 prong (with ground) or two prong configuration on the plug or does something look different indicating that it is 220 volts? Lastly, I know on 20 amp appliances the plug has one...
Replacing a 240 volt outlet with a 120 volt oulet
[ 1 Answers ]
We've switched to a central air conditioning system and no longer need the 240 volt outlet by the dining room window. The house was built in 1928, updated in 1957, and again a couple of ad hoc times thereafter. The wiring is at times very old, brand new or somewhat old. My guess is that the 240...
480 volt ballast
[ 1 Answers ]
Hello currently looking at setting up 480 volt 1000 watt high pressure sodium ballasts. Primary power is 600 volts 60 amp. From that what is the max amps I can use at 480 volts? A qualified electrition will be doing that part... then the trick will be working with the wiring and setting up...
240 Volt Wall Heater
[ 7 Answers ]
I have hooked both wires to separate circuit breakers one white and one black and connected them to the black and red leads from the wall unit and the ground poles on the heater box but it does not work. If I disconnect the white wire from the circuit breaker and connect it to the white posts on... View more questions Search
|