Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
American Standard Shower Valve
[ 10 Answers ]
I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...
Shower Drip - American Standard
[ 2 Answers ]
I have an American Standard Reliant + shower head that drips. Have replaced the cartridge & still dripping. Actually water is slowly coming out of the pressure balancing unit even when the water line is shut off. Do I need a new pressure balancing unit? What are the check stops for (one on each...
Installing a single lever shower faucet
[ 1 Answers ]
I need to know the names of the materials needed to install a new single lever faucet in a shower and instructions on how to install it starting from the rough in stage. I have the hot and cold supply lines capped off at this time.
Install Single Lever Shower Faucet
[ 2 Answers ]
I am looking for information on installing a single lever shower faucet. This will need conversion from the existing 2-faucet that is there now.
Single lever shower
[ 1 Answers ]
Plumbing Question! I have a single lever shower. The hot water comes out on the cold side, and the cold water come out on the hot side. How can I find a remady to fix this situation. I don't want to have to repipe the lines , unless it is necessary. Thanks for any advice. View more questions Search
|