Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring ignition on rider
[ 1 Answers ]
My ignition on my rider went out and I have another rider with a good ignition, can I change the bad ignition out with the one that works and if I can how would I do this if they have different colored wires? Thanks Kandice
1960 chevy c30 ignition wiring
[ 1 Answers ]
Help please, I need to confirm the ignition wiring on a 1960 chevy c30 truck with a 235 inch six. Wiring between the switch, coil, solenoid and distributor. A diagram would help a lot. Thanks, Jim
MTD 11/36 series ignition wiring, where do wires go
[ 1 Answers ]
5 wires on the back of my ignition switch 1. On one terminal there are 2 wires dark green wires 2. On another terminal there is 1 wire Black and it is hot all the time 3. Then on another terminal there is 2 yellow wires 4. Then another terminal has 1 orange wire hot when key in start...
Ignition wiring diagram; Tractor
[ 0 Answers ]
I have a Alice Chalmers Gas Model 170 tractor that the ignition switch went bad. It has 6 poles and I do not have a clue where the wire go to make it work. PLEASE HELP ! The battery is fully charged... there is a separate starter button and ignition light on the dash... and clutch has to be fully... View more questions Search
|