Trol-a-temp MM2 guide

maur522 Posts: 1, Reputation: 1

New Member

Jul 14, 2008, 12:44 PM

Trol-a-temp MM2 guide

Where can I find the installation and trouble shooting guide for Trol-a-temp Model MM-2

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jul 14, 2008, 01:35 PM

http://customer.honeywell.com/techli...0s/68-0101.pdf

Add your answer here.

Check out some similar questions!

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

Differential of return temp and cooled exit air temp [ 1 Answers ]

Here is the problem I am having, I had a new unit installed last year on my new house. I noticed that the compressor runs for a long time and shut off for a short period. This got my attention and wondered if the unit is running efficiently. I had my doubts from the start since the A coil looked...

Temp gauge showing temp, 2001 Chev Malibu [ 13 Answers ]

I have a 2001 Chev Malibu LS, V6, temp gauge is not showing any heat at all, not registering when I know the coolant is hot ? Veh has about 126000 mi on it, never been flushed out, thought I would attempt to flush myself but don't you think the problem might be a bad thermostat ? If so, where and...

Question about supply temp. & return temp. [ 3 Answers ]

The AC system produced supply temps. At 57-60 degrees on the first floor With a return temp. of 71 degrees. The second floor supply temp. is at 59 degrees with a return temp. of 72 degrees. I know there should be at least a 15 degree temp. difference from the supply to return. There was also an...