Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
110 volt versus 220 volt mini heat pump
[ 6 Answers ]
I have enclosed my screened porch to create more living space(Florida Room). I am using a single zone mini split ductless heat pump for heating and cooling. It has been calculated that I need a 12,000 BTU unit. However, most of these units are available in 110 volts and 220 volts. The 220 models...
Ballast
[ 7 Answers ]
What is the test procedure for a ballast. I would like to know how wired up in light and a bench test. Thank you in advance for any help. :eek:
120 volt outlet from 240 volt outlet
[ 1 Answers ]
I understand that it is possbile to wire a 120 volt outlet from a 240 volt outlet. My 240 volt outlet has 3 wires in, white, black, and a ground. Do I wire the 120 volt outlet from the either wire and the ground? My voltage meter indicates that connection is 120 volts. Is there any down side to...
Replacing a 240 volt outlet with a 120 volt oulet
[ 1 Answers ]
We've switched to a central air conditioning system and no longer need the 240 volt outlet by the dining room window. The house was built in 1928, updated in 1957, and again a couple of ad hoc times thereafter. The wiring is at times very old, brand new or somewhat old. My guess is that the 240...
Modifying a HPS ballast, spooky!
[ 6 Answers ]
Hi chaps, I have a 400W Metal Halide bulb and ballast. The bulb socket is permanantly attached to the end of the ballast and the unit is designed to hang vertically from the opposite end of the ballast. I would like to separate the ballast from the bulb by two meters. I have opened the ballast... View more questions Search
|