Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling Fan Wiring To Switch
[ 1 Answers ]
I just installed a new ceiling fan in a room where the switch previously controlled only an outlet and there was no power directly at the switch, only at the outlet. At the switch box I wired the two white wires together and then wired the black wires, one each, to the screws on the switch. The...
Wiring manual fan switch
[ 5 Answers ]
I'd like to wire my blower motor to my Honeywell CT2800 programmable thermostat so that I can use the manual blower switch. However, I am a bit confused as to how to do this. The furnace is a Clare Brothers MBG120. The 120VAC comes into the furnace and the white wire goes to the 120VAC to 24VAC...
Wiring a light switch
[ 2 Answers ]
The light currently just has a pull cord and I want a simple wall switch instead. The power runs to the light from the other side of the room. Do I just need to run a wire from the switch to the light and tie it in or have the power come to the switch first and then to the light? How does it tie...
Furnace fan switch wiring
[ 4 Answers ]
I have an oil furnace, controlled by a thermostat that only has 2 wires going to it, but I want to be able to turn on the fan only from the fan switch on the t-stat. There do not appear to be any further connections at the furnace to hook up to, and the fan switch at the furnace (which can be set... View more questions Search
|