Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is brass an alternative to dielectric union?!
[ 8 Answers ]
Good morning speedball, I am very clear on the theory of electrolysis and such between dissimiliar metals in solutions. But I have read that one can use brass fittings in leiu of a dielectric device. I find that hard to be true. Brass may have properties which can slightly negate the battery...
Dielectric Unions - Necessary?
[ 11 Answers ]
I have searched this site and others to find information on whether Dielectric Unions are really necessary when joining copper and galvanized pipes. The problem; I have found conflicting advice. In my own case I decided to use them after replacing galvanized for copper at the lav. But both leaked...
?nursing cat with on lump on nipple
[ 3 Answers ]
I have a nursing cat with four kittens about 3-4 weeks old. The mother cat is young not even a year old and has had a very hard time nursing. She has developed a large oval shaped hard mass on one of her back nipples. Feels like hard cold clay. Almost feels like it is attached to body. She has...
Pink nipple discharge
[ 5 Answers ]
This morning when I woke up I noticed that pink colored discharged had leaked out of my breast during the night. I've had the normal clear discharge for a couple of weeks now and I'm 36 weeks pregnant and just wondering if that's normal??
Noisy dielectric couplings
[ 1 Answers ]
I came across this post looking for an alternative such as brass fittings. The dielectric couplings installed are very noisy with water flow. These are exposed pipes in a loft style apartment, I rerouted two separate pipes replacing a galvanized section with copper in each (actually had a plumber... View more questions Search
|