OK I`m a twit... on the crucial page it told me! What model board I had... here's the specs
Computer Manufacturer
Gigabyte Technology Co. Ltd.
Computer Model
7VX
CPU Manufacturer
AuthenticAMD
CPU Family
AMD Athlon(tm) Processor
CPU Speed
751 MHz
Front-Side Bus Speed
100 MHz
Currently Installed Memory
256 MB
Maximum Memory Capacity
1536MB
Total Number Of Memory Slots
3
Available Memory Slots
2
OK I`m a little puzzled because it is telling me that I have two empty slots, but I have put two sticks in there, it seems that the extra 128mb which is pc100 is not being picked up.
I ran a Google search on it and was pointed to this link
http://www.badcaps.net/forum/showthr...=9007#post9007
It didn't help me but I noticed that the same message "mportant information about your system
Memory configurations for Windows 95/98/ME with greater than 256MB, require adjusting the Vcache settings as outlined by Microsoft article Q108079." is there as well...
How do I change my vcache settings? Perhaps this is the problem?
Anyway thanks again