Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to move toilet left 1" (cast iron)
[ 4 Answers ]
Hello, My current problem is I have cast iron plumbing in a concrete floor in a basement. Once the walls were finished and the new travertine floor in I noticed that the center of the toilet flange was only about 10.5" from the wall. This would make it a little tight on the left side when...
Rotating Toilet 90 degrees on Cast Iron Flange
[ 1 Answers ]
I am remodeling a bathroom in a 60s vintage home with adequated crawl space. I need to rotate the toilet flange 90 degrees to install the new toilet as the orientation has changed with the remodel. The materials of construction for plumbing is cast iron. I am keeping the same elevation of floor....
Remove cast iron flange
[ 2 Answers ]
I am replacing a plastic (fiberglass?) shower pan with a new one. I have the existing pan free from the walls and subfloor, but it is still being held in place by the drain flange (I did remove the strainer!). The flange appears to be cast iron (it is very rusted inside) and is about 4 inches...
Problems with toilet flange
[ 15 Answers ]
The problem I'm having is I'm installing a new toilet. Im also raised the floor 1/4" and have new tile down. i installed the new toilet flange to the soil pipe and then the toilet. The problem is when you flush it leaks (i can see the leak from downstairs) from where the toilet flange goes over the...
Shower flange"cast iron"
[ 3 Answers ]
I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts. View more questions Search
|