Ask Experts Questions for FREE Help !
Ask
    pdmircam1's Avatar
    pdmircam1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 9, 2008, 07:19 AM
    Sears model 917276102 Garden Tractor 54" Deck
    The deck will not stay attached to the tractor on one side.
    I was told by a Sears repairman that this was a problem
    With this model tractor. How do you fix this problem?
    I bought the sway bar the repair man said would fix it
    But it was to long. Is there another way to fix this?

    Thank You
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 9, 2008, 12:44 PM
    Sometimes you can do a little welding to make the repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I replace my mower deck belt for a 38 inch cut sears craftsman lawn tractor [ 3 Answers ]

How do I replace a mower deck belt on my sears craftsman lawn tractor model # 917.254940

Sears Model 917.256524 Lawn tractor 15.5 HP [ 9 Answers ]

I have a 15.5 Hp Craftsman lawn tractor. It starts fine but when you push the blade lever up to engage the blades the mower dies. Also if you let out on the brake/clutch pedel the mower stops. Note: the blade safety switch is OK and so is the clutch safety switch as is the seat safety switch. Any...

Sears garden tractor dies when clutch is released [ 5 Answers ]

I have a 25HP 2003 model Sears tractor that dies each time I either release the clutch or turn on the mower PTO. I have replaced the plunger switch under the seat but that didn't solve the problem.

Smell of burning rubber after changing drive belt on Sears Garden Tractor [ 3 Answers ]

I changed the Motion Drive Belt on my 20hp 1999 Sears Garden Tractor. After changing, tested it, and it has plenty of "pick up" and runs good. However, after a minute or two, smell burning rubber. Is this normal, perhaps a "break in" period, or is it likely I have done something wrong?

View more questions Search