 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How can I get enamel off heating element
Hi,
I have a problem here. I left kettle on the electric stove for too long:( All the water boiled out & as a result the enamel from the kettle melted onto the heating element of the stove. Now I have enamel on the heating element. Any idea how I can get it out ? Thank you so much. Your help could save my life : I did it in somebody else's house, where I'm supposed to keep an eye on everything. Please, heeeeelp :) |
||||
|
||||
|
Is this a glass top stove or a coil stove? If it is a coil stove (black coil you put the pot on) they can be replaced. Make sure the coil (burner) is off, lift a little and pull the coil out. Take it to Lowe's, Home Depot, etc and buy a replacement. Take the model and serial # of the stove w/ you also.
If it's a glass top stove, you can try cleaners for that type of surface and a razor blade to scrape the enamel. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Maytag dryer model#SDE5401AYW and it quit heating. We purchased a new heating element and went to hook it up but we have two gray wires that come from the wire harness at the motor that we have no clue where they go. My father-in-law took out the old heating element and didn't mark the...
I plan to work on a tub for a tenant of mine. He has not taken care of it in any way. The tub is badly stained with little or no enamel left. The splashguard made of fiberglass has been painted and is peeling. There is mold in many spots. I plan to thoroughly clean and scrape all the paint,...
My mother's tub has a hole rusted through it... its an old rectangular enamel finished tub... might be a steel or cast iron not sure.. I thinks its steel because the hole isn't that deep and I can almost my finger through it... pretty sure cast iron is much stronger... any way to repair this short...
To stop the dryer we often open the door. When I open the door the drum stops turning. The heating element remains on. If I turn the timer to off the heating elelment will go off. If I set the timer to on the heating element starts immediately before pushing the button to start the drum. What...
View more questions Search
|
