Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tecumseh engine running rough
[ 1 Answers ]
I have a 5.0 horsepower Tecumseh engine. I used to be able to start the engine with the first pull after I primed the engine 3-6 times and the engine ran great. Now it takes me 4-6 pulls after priming, and I have run it in a lower gear to keep it from stalling. I wasn't sure what could be wrong?...
Sears Snow Blower 5.0 hp Tecumseh Engine Problems
[ 3 Answers ]
I have a Sears model number 536.88521200 snow blower. It is a two cycle with manual and electric start. After I run it for 10 minutes or so, the engine revs up to full r.p.m.. It:s almost like the acclerator is stuck. It still runs fine but I am afraid the engine will burn out. I shut it down, it...
Working on old snowblower with a Tecumseh engine
[ 4 Answers ]
The HP is no more than 3 or 3.5. It has a horizontal shaft and a diaphram carb, I had problems with the carb flooding so I rebuilt the carb. The gas tank is slightly rusty inside. I managed to get the engine running smoothly and put it in the shed. About 2 weeks later, it started right away....
BACKFIRING,13hp Murray Riding Mower, Tecumseh Engine
[ 2 Answers ]
Hello I am having trouble with my 13HP Murray riding mower.Model 40541x99C OHV130-206810D. TECUMSEH ENGINE. First it was backfiring REALLY loud:eek:.. in all gears, all speeds.. I cleaned gas tank, replaced fuel filter, spark plug, cleaned carb, replaced air fiter. The engine: (1) BACKFIRES...
6.5 HP BS Engine will not start
[ 1 Answers ]
Here's what I know: - Engine is on Troy Bilt mower that I have had for several years. It has never not started. - I have good air to the engine (removed the filter just to make sure) - I have good spark (checked it with plug out of engine) - Don't know about gas flow but it primes OK... View more questions Search
|