Ask Experts Questions for FREE Help !
Ask
    a5valencia's Avatar
    a5valencia Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2008, 03:53 AM
    Kenmore Washer 70 series Switch Replacement
    How do I replace the door switch on my Kenmore 70 series washer mach?
    XenoSapien's Avatar
    XenoSapien Posts: 627, Reputation: 42
    Senior Member
    		  
    #2

    Mar 17, 2008, 04:06 AM
    See if you can find the image of your washer online.

    Generally, I've found that you have to remove the front of the washer, and there are two screws on the right side after you open the lid. You may have to also open up the back, as that is usually where the wires for the switch hook up to the washer.

    XenoSapien
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 80 Series Washer [ 5 Answers ]

My 80 Series Kenmore washer does not stop filling with water. How do I fix

Kenmore 90 Series Washer [ 3 Answers ]

HELP...My Washing machine KENMORE 90 Series will not fill with Cold waster, YES THE WATER IS ON AT THE WALL. It will run for hot and shortly for WARM, but the water gets too hot so it shuts off. :confused:

Kenmore series 70 washer [ 1 Answers ]

I have a Kenmore series 70 washer that will not agitate. I have searched and everything says to remove to bolt in the agitator and then remove the agitator. My problem is that the bolt will not loosen or tighten. If I put my socket on the bolt and then turn the machine on to agitate, it moves...

Kenmore 70 Series Water Connection Replacement [ 1 Answers ]

I have a 1 year old Kenmore 70 Series washer and can not figure out how to remove the top or back so I can replace the part the water hoses are connected to.

View more questions Search