Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lead poison
[ 4 Answers ]
Was paint with lead used on old models Of matchbox cars?
Lead piping
[ 6 Answers ]
I think I have lead piping in my bathroom. Wanted to know if I could used a compression fitting to do a lead to copper joint. And does anyone know if I could use normal copmression fittings on the lead pipe because I want to add a valve.
Lead paint
[ 2 Answers ]
Does any one know what year they stopped using lead paints? I have some old matchbox cars I would like to give to my kids but don't want to give the ones that might contain lead paint.
Lead bend
[ 7 Answers ]
My master bath had a leak at the toilet so I pulled the toilet up and found that the closet flange and the lead bend where no good. The lead pipe is so bent and you can allmost put your finger threw it the lead bend goes into a cast pipe and I would like to replace the bend if anyone has a clue on...
Removing a tailpiece from lead solder
[ 1 Answers ]
How to remove the tailpiece on the p trap that is soldered in place with lead at the face of the wall View more questions Search
|