Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heater Blower Continuosly Stays On
[ 6 Answers ]
Last night I had replaced my working noisy buzzing Honeywell mercury t-stat with a quiet programmable Lux t-stat, reconnected the respective R to R, G to G, W to W and C (blue) to the RH/RC terminals on the t-stat just as the instructions required. Then I attempted to turn on the heat through the...
Furnace Blower stays on too long.
[ 1 Answers ]
Hello. I have a Honeywell Electric furnace. Model # AR36-1 The blower stays on too long after furnace shuts off and cold air blows out. Any ideas how to fix it? Thanks.
Blower stays on
[ 1 Answers ]
I am working on a Tempstar furnace, Furnace blower comes on even thermostat is fully disconected from control board. Replaced control board and limit switch. Furnace still coming on. Checked all the wire locations. Tempstar model is - NFCX3600C1 Serial is- L001362305 Any...
Furnace Blower stays on, no heat
[ 2 Answers ]
Hello, I have an older Bryant furnace model # 396gadd36075. I turned on the heat the other day and the no heat. I notice the unit had been turned off (pilot was not lit), apparently by the service company I use when they came to do the spring check for the AC. I followed the instructions to...
Blower Fan stays on when it should not
[ 2 Answers ]
New Amana heat pump system: outdoor unit ASZ140481A, indoor unit (in attic) AEPF426016B + TXV. Thermostat: TotalTouch P286-200. When fan setting is FAN AUTO and the system is not cooling or heating, the fan can come on and stay on for hours, or the fan stays on after heating/cooling stops. The... View more questions Search
|