[djocunningham]

Hello,

I recently moved into a house with a 3' x 4' concrete garden pool. It has a spout in the middle of the pool and city water can be turned on with an old-fashion T device. There is also a built-in overflow valve. A plumber advised me that I should not use city water, because it would cost me an arm and a leg. My question is how can I bet utilize this pond to its fullest aesthetic advantage. I do not want a lot of cable and electricity running to it.

Best,
Jo Cunningham

[Fr_Chuck]

I am glad you have found this site and hope you can get lots of help for all sorts of issues.

You have posted this question under the Introduction pages where people are to merely introduce thierself and perhaps just say hello.

The area you need to post under most likely would be plumbing. If you click the word subject on the line at the top of the page you will find a link to the various subjects you can post under.

I believe you will find some great people there that will give you proper advice.

Good luck and again welcom