Ask Experts Questions for FREE Help !
Ask
    kimmick99's Avatar
    kimmick99 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2008, 07:10 PM
    Scag turf tiger won't stay running
    My turf tiger won't staying running When I start the mower it will continue to run until I allow the key to return to the run position. If I hold it in the start position it will run but I know the starter is still spinning. What is the fix?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 1, 2008, 05:05 PM
    Check your wiring that goes to the switch. Probably the switch itself.
    TRUBBLESHOETEN's Avatar
    TRUBBLESHOETEN Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 1, 2013, 03:40 PM
    I have the same problem and came up with switch senario also. Replaced with new switch, still have same problem!
    TRUBBLESHOETEN's Avatar
    TRUBBLESHOETEN Posts: 2, Reputation: 1
    New Member
    		  
    #4

    May 1, 2013, 03:45 PM
    Quote Originally Posted by TRUBBLESHOETEN View Post
    I have the same problem and came up with switch senario also. Replaced with new switch, still have same problem!
    Can you perhaps suggest a different fix? My Scag turf tiger has two 20a spade fuses. First one will blow, then replaced, and the other will blow! Thanks
    BassMaster57's Avatar
    BassMaster57 Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Jun 22, 2013, 01:13 PM
    I have the exact problem, did you ever resolve it?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #6

    Jun 22, 2013, 01:40 PM
    Replace control module.
    BassMaster57's Avatar
    BassMaster57 Posts: 2, Reputation: 1
    New Member
    		  
    #7

    Jul 7, 2013, 05:25 PM
    Wasn't the control module. Ended up being the voltage regulator which failed due to the control module connector shorting to ground.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #8

    Jul 13, 2013, 02:11 PM
    :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mower will not stay running [ 3 Answers ]

I have a Briggs & Stratton riding mower. At first when it got too hot, it would die. Now, it seems like it's getting too much gas; I smell fuel. It won't start. Any thoughts?

Ryobi won't stay running [ 1 Answers ]

I have ryobi 30cc weedwacker that will start but stalls when you give it gas.I changed spark plug and fresh gas. Cleaned exhaust screen.

My weedeater won't stay running [ 1 Answers ]

My weedeater won't stay running

Won't stay running [ 14 Answers ]

I have a 91 crx it sat up since may and I just put a d15b vtec in this past weekend. I sat the engine in and hooked up all appropriate connectors with the exception of two wires that is close to the intake manifold (yellow w/ green and a black) I have no clue where they go all I know is if you...

View more questions Search