Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing Weathertron thermostat with Honeywell
[ 7 Answers ]
I am attempting to replace our Weathertron thermostat with a Honeywell RTH3100C. We have a Trane heatpump system. I am having trouble with the wiring. My wires don't match the 'less common wire designations' in the manual. I have the following wires on the Weathertron: R-red T-brown O-orange...
Replacing A Weathertron to a Honeywell
[ 1 Answers ]
I am attempting to replace our Weathertron thermostat with a Honeywell RTH3100C. We have a Trane heatpump system. I am having trouble with the wiring. My wires don't match the 'less common wire designations' in the manual. I have the following wires on the Weathertron: R-red T-brown O-orange...
Replacing Weathertron thermostat with Honeywell RTH8500
[ 1 Answers ]
Can someone confirm that I am wiring my new Honeywell RTH8500 thermostat the right way. I am replacing a Weathertron Baystat240. RTH Connection Label Wire Color RC Jumper R (R)Red O/B ...
Replacing Trane Baystat240 with Honeywell RTH3100c
[ 3 Answers ]
I have recently acquired a residence that had a much older HA/C unit. The thermostat is a TRANE Baystat240 (3AAT80B1A1). Up till now it worked well. Recently both the heat and air were blowing at the same time. Go figure! LOL. I have recently attempted to replace the thermostat with a Honeywell...
Replacing old heat pump thermostat with Honeywell RTH3100C
[ 1 Answers ]
I have a Rheem heat pump with auxiliary and emergency heat. My current thermostat is a Seco TA-2000 with the following wiring configuration: B W2 X R G and a piece of wire connected between E and W2. There's also an orange wire that's not connected to the thermostat. The Honeywell manual does not... View more questions Search
|