Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Mishap in replacing supply valve under sink
[ 3 Answers ]
I was replacing the supply valves under my new bathroom sink as the old ones had old fashioned metal connectors that wouldn't work. The old supply valves had a soldered on metal pipe right behind the knob, and I now realize (too late) that that was what I needed to unscrew (probably by cutting off...
Double Sink and Width of Sink Base
[ 3 Answers ]
Hello. I just bought my first condo, and immediately changed the appliances (my fridge is now larger than the previous one at 30 inches wide (normal I know). I am not replacing the cabinets. I have limited space on one wall, so I need to DOWNGRADE from a 36 inch SINK BASE to a 33 inch SINK BASE. My...
No running water in one sink of double vanity
[ 8 Answers ]
Hello all. I have an original (1990) builder-grade double vanity in my master bath. One sink works perfectly, the other sink will not run water. I checked the shut-off valves under the sink, they seem fine. There was no reason for them to have been turned off anyway, I was just making sure. ...
Kitchen double sink backfilling
[ 1 Answers ]
Just recently the kitchen sink has been filling up through the drain on both sides of the double sink whenever water is ran (starts immediately after water is ran). It is really bad whenever the dishwasher or garbage disposal is used. The water rising up into the sink is also filled with little...
New double sink
[ 1 Answers ]
I just installed a new double bowl sink and have a problem. When there is water in both bowls, it drains very slowly. Water in just one bowl OK. One thing I did not do was add a tail piece to the trap before attaching the 'double' drain pipe. Could it be that there is not enough length from... View more questions Search
|