Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing cast iron / lead joints
[ 4 Answers ]
Hi; I have a vertical 2 inch cast iron vent pipe that I need to remove to install a medicine cabinet. I have cut it in one spot with a sawzall, but there is also a joint in it where I would like to separate it. The joint appears to be poured with lead. If I heat it with a propane torch to get it...
Cast iron soil pipe
[ 1 Answers ]
Hi I would appreciate very much if someone could clarify some questions I have on oakum/lead joints I have 3 horizontal hub and spigot joints to repair on 4" cast iron sewer pipe. The pipe itself is @ 5 years old. I would like to know if this is the correct way to solve this problem... ...
Connecting PVC Line to Cast Iron pipe
[ 5 Answers ]
I am adding a second bathroom to an older 1-1/2 story house. I had planned to tie into the existing waste line. The existing toilet is on the first floor and discharges directly into a vertical cast iron pipe which appears to be 6 inches in diameter. This vertical pipe connects in the crawl space...
Cutting cast iron pipe
[ 7 Answers ]
Hi, I have a project I am working on in the basement and I need to tie 3" plastic into 3" cast iron. I will be renting a ratchet type cast cutter. The cast comes out of the basement floor and goes straight up to serve the first floor bathroom. What I would like to do is cut a section out of the...
Cast iron waste pipe
[ 2 Answers ]
My husband and I have just bought a 32 yr old house and have started updating some of the fixtures. In our 1/2 bath the previous owners installed a pedistal sink with brass fixtures (p-trap, hot cold valves). We are changing all things brass to brushed nickel. So we took out the sink to paint... View more questions Search
|