Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Re-attach cord on tecumseh snow king recoil starter
[ 11 Answers ]
My cord to the recoil starter on my snowblower broke at the base. I have unbolted the starter from the engine and brought it inside. It is looking like I have to take apart the unit just to push the cord into its slot as there is very little finger room to work with. The starter is on an 11...
Ariens old snow blower with problems!
[ 4 Answers ]
Well my friends gave me an older my guess is 1980s snow blower with and 8 horse power motor, it did not run my guess was the carb,took it apart sprayed the holes and got as much junk out of the tank as I could put it back on and did not fire up it tried but there was not gas coming into the...
Snow blower problems
[ 11 Answers ]
I have a 7 year old craftsman snowblower that was working fine until today. It was seeming to lack power. Does anyone know what I should look for to fix the problem before it get worse?
Working on old snowblower with a Tecumseh engine
[ 4 Answers ]
The HP is no more than 3 or 3.5. It has a horizontal shaft and a diaphram carb, I had problems with the carb flooding so I rebuilt the carb. The gas tank is slightly rusty inside. I managed to get the engine running smoothly and put it in the shed. About 2 weeks later, it started right away....
BACKFIRING,13hp Murray Riding Mower, Tecumseh Engine
[ 2 Answers ]
Hello I am having trouble with my 13HP Murray riding mower.Model 40541x99C OHV130-206810D. TECUMSEH ENGINE. First it was backfiring REALLY loud:eek:.. in all gears, all speeds.. I cleaned gas tank, replaced fuel filter, spark plug, cleaned carb, replaced air fiter. The engine: (1) BACKFIRES... View more questions Search
|