Ask Experts Questions for FREE Help !
Ask
    kdavid's Avatar
    kdavid Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2006, 03:11 PM
    Honeywell RTH230B thermostat- filter change?
    Honeywell RTH230B thermostat- filter change? The instructions are in spanish -which I don't read/speak- how do I set the program function so it reminds me when its time to change it out? (does it give a visual Que or audible alert?)
    klmgb's Avatar
    klmgb Posts: 114, Reputation: 13
    Junior Member
    		  
    #2

    Jan 7, 2006, 04:58 PM
    I have the instructions in .pdf (english BTW)if you want, but it says this about the filter replacement

    "After 500 hours of operation, an icon appears to indicate
    That the filter needs replacement. Once the filter
    Is replaced, press [ Filter ] for 3 seconds to remove
    The icon and reset the counter."
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell RTH230B filter change [ 2 Answers ]

Our unit had the Filter light on yesterday and it was blowing very cool, so we changed the filter today and reset the counter, but it is not cooling the house now. We only changed the filter about 2 weeks ago and have been changing it every 3-4 weeks since we got the new thermostat a couple of...

Honeywell rth230b thermostat [ 3 Answers ]

We hooked up the honeywell programmable thermostat and it was working fine for 10 days or so until this weekend when the temperature should be at 67 all day from 6am to 10pm and 62 from 10pm until 6am on sat and sun. this weekend the thermostat does not bring the temp up to 67 but it leaves it at...

Honeywell RTH230B Thermostat [ 1 Answers ]

I recently installed Honeywell #RTH230B thermostat to replace and old Honeywell # T87F( old round non digitital type). I have oil burner with basebaord water heat. Since my olf thermostat was 2 wire only and I have no AC I pulled the jumper wire between Rh and Rc as per the instructions. Thj9is...

Honeywell Thermostat RTH230B [ 4 Answers ]

I see there are a few questions on this one, but mine seems simple. I have Red, Yellow, Green and White leads from the old Thermostat. I have no idea where to place the leads, in the channels under the screws or the channels on top. My leads do not reach from out of the wall to go under, and if it...

Honeywell Thermostat RTH230B [ 14 Answers ]

I have 6 wires to connect. The colors are as follows: W, Y, G, B, O, and R. The thermostat calls for W, G, Y, Rc, and Rh. Where do I plug in the R and what do I do with the B and O? Any help would be greatly appreciated. Thank you

View more questions Search