Ask Experts Questions for FREE Help !
Ask
    aroman's Avatar
    aroman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2007, 04:39 PM
    Code 54 on carrier weathermaker furnace
    My furnace stopped working today. It is a weathermaker (carrier) 8000
    That is approx 14 years old. It has been serviced regularly
    To the best I can tell it is flashing a code 5 4 can anyone help me with this?
    It kicks on, blows cold air for a few minutes then shuts down.
    Thank you
    MrCool's Avatar
    MrCool Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 1, 2008, 08:47 PM
    Hello aroman a little more info is required about your furnace. Give me a call @ 416 754 0645 and we can solve this problem together.

    MrCool (Dave)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Weathermaker 8000 [ 4 Answers ]

I've had my carrier a/c heat unit for about 10 years.. . Good service, but it has recently been making a sqeaking/chirping/screeching sound when the fan is running in a/c mode. I reminds me of the sound a car makes when the fan belt is slipping. Any suggestions? Thanks, lankford3

Carrier weathermaker 8000 [ 1 Answers ]

I have a carrier weathermaker 8000 furnace and it come on for about 20 seconds then the burners cut off, the fan keeps going and it just keeps repeating this cycle like it is short cycling... Does anyone have any ideas because it is freezing in my house...

Carrier weathermaker 8000 [ 3 Answers ]

I have a carrier weathermaker 8000 gas furance... when the thermastat calles for heat the furance turns on it willgo for 3 for 4 min... then the flame stops and the blower runs for the 128 seconds... this is all normal... but the thermastat is still calling for heat and the furance kick on again...

Carrier Weathermaker 8000 Trouble Code [ 2 Answers ]

I have a carrier Weathermaker 8000. Started up furnace and forgot to remove baffle. Now have trouble code 33 and have to manually reset. How do I accomplish this?

Carrier 2 Stage Gas Furnace Code 33 [ 1 Answers ]

We are having trouble last couple of days now that temp is near 0. The thermostat is calling for heat the furnace runs as follows. It runs on low stage for about 16 minutes and then the high stage turns on for a couple of minutes. The burner then shuts off and the blower shuts off and there is...

View more questions Search