Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman 2100 PSI 2.0 GPM 5.0 HP pressure washer
[ 1 Answers ]
I have a used Craftsman 2100 PSI pressure washer that is acting up. I received this pressure washer from a relative who was having problems with it and just decided to buy a new pressure washer instead of messing with it and getting it fixed. The engine starts right up and runs good and smooth, I...
Pressure Washer w/Honda GC-160 5.0 HP Engine
[ 4 Answers ]
I can't find the manuel for my Pressure Washer w/Honda GC-160 5.0 HP Engine. I believe I need to mix oil into the gas for this pressure washer, but no where on the washer itself does it say. Can you tell me what the oil/gas ratio is for this engine? Or specifically how much oil to add to 1...
Replacing craftsman engine pulley
[ 4 Answers ]
Can anyone give me some pointers on replacing the engine pulley on my craftsman riding lawn mower which is about 11 yrs. Old. The bolt in the center of the pulley needs to be removed to replace the pulley but the entire pulley turns when I try to loosen the bolt. Any suggestions?
Craftsman Lawn tractor engine dies
[ 6 Answers ]
I have a Craftsman lawn tractor (model #917-257481). The engine dies when I pull out the PTO switch to engage the mower. Have replaced PTO switch and the "clutch" switch. It still does it. I can hear the PTO engage. With the new "clutch" switch installed it also dies when you let out the clutch. I...
Craftsman pressure washer 3000psi 7.0hp
[ 2 Answers ]
I have used my washer twice and loved it. Now I go to use it and it runs fine, but no pressure. Is there anything I can do to correct this other than take it in for repair? View more questions Search
|