Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Failed t & p valve in hotwater heater
[ 2 Answers ]
We have a 4 yr. old gas hot water heater. A few months ago (hot summer) we noticed our therm use was 3x's more for the summer months than last summer. Our plumber determined our t & p valve was not working and he has replaced it. Could you please tell me why a faulty t & p valve caused us to use...
Flow from pressure release valve
[ 5 Answers ]
I have a newly installed hot water heater (GE model PG40T09AVH00) and there is water slowly coming out the pressure release valve. Presently, I leave a 32oz cup under the pipe and empty it every day or two. The temperature is set closer to warm than it is to hot to protect our 2 year old...
No pressure in tank-gauge at 0 water flow to home is OK
[ 3 Answers ]
I have water coming into the house so I know the well pump works fine. The problem is that there is no pressure in the pressure tank and the gauge is at 0. over the winter I ran the water to a steady flow so the pipes wouldn't freeze when the temps dropped to single digits what's wrong with the...
Hot water tank how do I turn it on for my hotwater
[ 5 Answers ]
I have not had hot water for 3 days I need a shower, asap , how do I light my pilot where is it I have a gas hot water tank it has a switch that says on,off,and pilot and in the instructions it says to light pilot and hold for 1 min but do I use a lighter or what where is the pilot and how do I...
Washer hose flow valve
[ 3 Answers ]
I just bought new washing machine connectors at a national home improvement store. They are billed as flood preventative because they have a diaphram valve at the connector which shuts down water flow when flow exceeds 2.5 gpm. However, I can only turn on the water valves less than a quarter of a... View more questions Search
|