Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Closed loop Chilled water system - pressurisation units
[ 18 Answers ]
Hi all , I am new to this site... Could you please some one help me out to locate the pressurization unit for a chilled water system application in 120m tower building. The heat exchangers/CHW pumps are located at 0.0 level... System volume is about 35-40 m3 and pump head is around 4 bar... ...
Multi-circuit pressurisation System (chilled water)
[ 2 Answers ]
Hi all, I am processing at material submittal for a pressurization unit for a 42 story tower in the middle east. The system is not hooked up with district cooling and we have our own chillers condenser heat echanges etc. We have 3 circuits all of different pressures. High zone, low zone and...
Chilled water system design pressure and pressurization unit
[ 2 Answers ]
Hi Could u tell about chilled water line pressure what pressure should be maintain for g+7 building if chiller installed on roof and pump room at seventh floor. And could u tell me capacity of pressureization vessel pump watts for 14mtrcube system volume location same pump room(seventh floor) View more questions Search
|