Ask Experts Questions for FREE Help !
Ask
    creekcabbt's Avatar
    creekcabbt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2007, 07:45 PM
    Hot tub
    Does a hot tub have to be level to run the jets?
    ALZ1's Avatar
    ALZ1 Posts: 43, Reputation: 3
    Junior Member
    		  
    #2

    Oct 17, 2007, 07:36 PM
    Depending on the location of the skimmer/suctions. And plumbing configuration. Some you can get to start half full, others have to have the water be above the skimmer/suctions.

    main concern: It should be level on the bottom area where you can stand in the middle, really needs the solid flat support there.


    How off level are you talking about.

    ALZ1
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water to shower head, but Hot water to the Tub? [ 2 Answers ]

My husband and I just purchased a new house. We have found that the shower pressure in the bathroom is wonderful however once you have set the right temp from the tub spout and switch over to the shower no hot water makes it to the shower head. We can only turn off the cold water completely in...

No hot water from tub faucet; all others - very hot [ 2 Answers ]

Every hot water faucet in my house produces scalding hot water. EXCEPT the upstairs tub/shower. From that faucet we only get lukewarm water. Why? What should be replaced? bradsmithmm

Hot tub g.f.I [ 1 Answers ]

I recently hooked up a hot tub that required a 240v with no neutral. (50A) I took a two pole 60 from the main service and ran 6/3 teck cable to a 2cct outdoor enclosure outside to within 5' of the tub. Into the enclosure I hooked up the red to the main the black to the other main and the blue to...

View more questions Search