Ask Experts Questions for FREE Help !
Ask
    Klein's Avatar
    Klein Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2005, 04:47 PM
    Ceramic Tile Baseboard
    Hello - I am putting in a ceramic tile floor in a bathroom and plan on cutting the tiles and using them for a baseboard. Is there a correct size that this baseboard should be? And should I put anything on the top edge of the tile to finish it off? Any information would be appreciated. Thanks!
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 20, 2005, 05:14 PM
    What I remember seeing is tile with a finished, rounded edge or sort of a tile quarter round to finish it. As for the height, I would go with something easy that appeal to your eye. Maybe at least 4'' high to protect the base of the wall.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing Ceramic Tile from concrete slab [ 2 Answers ]

I am in th process of removing ceramic tile from my back porch. We are having a pool installed and need the slab scraped clean so they can float it install acrylic deck. I was told by the contractor that the surface needed to be as smooth as possible. Removing the tile was not difficult, I...

Can you paint ceramic tiles? [ 2 Answers ]

I have ceramic tiles between the counter top and where the cabinets start in my kitchen. I think this is called the back wash? I plan on changing the kitchen scheme in the near future, but removing the tile doesn't seem appealing. Are there paints that adhere to these? Even if it was textured...

Baseboard heater help [ 2 Answers ]

I have to replace a missing baseboard heater 110 volt 1500 watt all I can find at home depot Lowe's etc is 220 volt can I use one of those hooked to 110 I do understand the output would be lower but actually don't need that much heat in that room anyway Thanks Gene

Baseboard heaters [ 12 Answers ]

Hi all.. New to the forum.. Thanks in advance for any help.. I am trying to set up new baseboard heating in my basement.. My questions are to what size breakers to use and if I can put it all on one circuit.. I want to set up 3 rooms: Room 1 - 2 1000 watt heaters Room 2 & 3 - 1 1500 watt...

Ceramic [ 1 Answers ]

What are ceramics?

View more questions Search