Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Ceiling Fan Remote Receiver
[ 12 Answers ]
Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:
Hampton Bay Remote Ceiling Fan
[ 1 Answers ]
Hi! We have a Hampton Bay ceiling fan in our bedroom that is run strictly by remote (no pull chains). It usually works fine and we haven't had too many problems, but occasionally we can get it to turn on, but not off. All of a sudden it (the remote? The receiver?) will stop working when the...
Hampton Bay Redingtom IV Ceiling fan remote receiver
[ 1 Answers ]
The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim
Hampton Bay ceiling fan remote
[ 1 Answers ]
The ceiling fan remote has lost part of its function. The button which turns the light off/on and dims the lights will only dim the lights. It will not turn the lights off and on. All other functions work such as fan speed, fan off/on and reverse. Any thoughts
Hampton Bay Fan Remote Not Working
[ 2 Answers ]
:) Hi, I purchased a fan less than a year ago and the sensor on the remote seems to have gotten some kind of glitch. The little red sensor light stays on continuously, instead of going out after pressing a function. When I shut off the fan, and go to put the remote down, it starts up in high... View more questions Search
|