Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moen one handle , pressure prob.
[ 16 Answers ]
Hi, I have a MOEN faucet , ever since I installed it I was never happy with the pressure , now after 8 years it seemed worse so I took it apart to see if the screens were dirty , nothing there , when the handle is not on the flexible hose , I turn on water and I notice that when on the cold side ,...
Moen Faucet
[ 3 Answers ]
Hi Tom I found the site and registered but I still need my son to reduce the size of the pictures so I can attach them. He took the photo-editing software off my computer. I'll get back to you shortly. Thanks. Mark Ingham
Diverter valve for Moen faucet
[ 2 Answers ]
Hi, I need to replace the diverter valve (1225) on the kitchen faucet. Do I need to remove the entire faucet to do this? If so how do I do this? Thanks
Low hot water pressure from kichen faucet only- 1 handle faucet
[ 7 Answers ]
Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...
Soldering a Moen shower valve
[ 4 Answers ]
I'm new to this forum and have a question concerning the best way to solder a Moen model 62320 shower valve. Do I need to remove the cartridge? I was afraid it would get too hot and melt the o-rings. How do you know how long to heat the joint before you apply solder. It seems some of my joints are... View more questions Search
|