Not your question?
Ask your question
View similar questions
Check out some similar questions!
Baseboard heater wiring circuit
[ 6 Answers ]
I just finished intaling a baseboard heater and I have a question that has been nagging me. The heater is on 240 circuit. So, I ran 12/2 and used the black and white to run my two hot wires as is common practice. Please excuse my ignorance on this matter, but this got me wondering. I have...
Attic bath
[ 1 Answers ]
I'm finishing the attic space and need help connecting a shower and toilet together. A 3" drain and hot/cold supply lines have already been run up from the crawl space but pop up close to the eaves of the space. So I have got to come across a few joists to my fixtures. Because of the head room,...
Bathroom in Attic
[ 1 Answers ]
Im thinking of adding a bathroom to my attic. I would like to know if I need to run new piping from the first floor, I believe this is all under concrete also. Or, can I hook up to the existing piping and vent pipe that is in the attic presently. Please respond ASAP... thank you.
Outside GFI circuit - 15amp outlet on 20amp circuit
[ 1 Answers ]
I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...
Wiring a switch and GFCI circuit
[ 3 Answers ]
I am in the process of wiring my bathroom. The lighting and fan circuit has one fan, one overhead light and one vanity light. I was wanting to use a NuTone single space / 3 switch unit for all three. Wiring that is all very straight forward but the fan requires a GFCI circuit to make it OK for over... View more questions Search
|