 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
SCSI Adaptec boot up
Hello,
After installing Adaptec 2490 scsi card in PC ,upon boot up I see card info on black screen at top, then my PC bios/cpu info page. Have to press F1 to resume boot up.Didn't do this before card was put in. Is there a way to to boot up without seeing the bios page and pressing F1? Looking for a streamlined way. P II 266, W 2K pro sp4, even though old hardwre runs really good. Thanks |
||||
Check out some similar questions!
Hi, When trying to boot the following error displays:“lsass.exe could not be found". When booting from the repair disc, it hangs. Running Windows XP. Any suggestions? Thanks Thanks guys, I ended up doing a fresh format and install.
I have a scsi cd rom that is installed in a rack unit which has a front panel ID selection button (1-7 ) There are 2 connectors from this selector which plug into the cd rom drive But I have no clue which pins to go to? The connectors are female 3 pin each. Would like to have this set up, as it...
My computer is a dell 5100 inspiron. It has a cd-r/w dvd-rom combo drive (HL-DT-ST RW/DVD GCC-4241N). I can't boot from a cd-r,regular cds are fine, also I get the same thing in windows. I did firmware update and bios update. I have run out of ideas. PLEASE HELP!!
Hi I can't see my computor boot up until it reach's the log in window for windows xp. And then the moniter turns on. i.e I can't get into the bios because I can't see anything. I've installed the correct graphics card driver... Any ideas? :cool:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
