Ask Experts Questions for FREE Help !
Ask
    shajiv's Avatar
    shajiv Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 9, 2007, 11:37 AM
    Unable to tune satellite TV receiver
    My satellite receiver(Eurostar) ,when I try to tune new channels,the message comes "channel data is full". And I am unable to tune.What can be the problem and what can I do ?

Check out some similar questions!

Humax receiver unable to tune spacetoon English [ 10 Answers ]

Last week my TV was at fault finally after fixing it I found all the channels on my humax receiver model IR Ace II were mixed up . Some how I have tuned the receiver and got most of the channels . However some of the channels are not coming It says tuning failure if I put that frequency . Like...

Tuning my satellite receiver to my TV [ 1 Answers ]

Greetings, Tuning my satellite receiver to my T My TV has lost the ability to tune in to my satellite receiver. In the past, I just connected the SCART cable between the TV and the satellite receiver and the picture would come on automatically, now all I get is some sort of very unstable ,...

Dvd/satellite receiver [ 1 Answers ]

I would like to know how to hook up my dvd player through my satellite receiver. The TV does not have any place to plug the red, white, and yellow cords to but the satellite receiver does. I have connected the dvd player to the satellite receiver I just can't get a picture.

Receiver for European Satellite Stations? [ 1 Answers ]

Is there a satellite receiver on the market that can access european satellite stations, and if so is a decoder required. I am based in the UK. Obviously I would need a satellite dish that can be remotely.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.